Product function:The liner bracket is one of the parts of the bull socket, and the liner bracket needs to be assembled with other products.
Mould for cold runner bull liner bracket:
1: The three plates of the mould structure of the inner liner bracket are put into glue. The four sides of the lower mould are sliders. There is a side thimble inside the slider to ensure that the side rib is released.
2: The average wall thickness of the product is 2.0mm. The larger the demoulding Angle is, the easier it is to demoulding the parts, but it is easy to cause uneven parts and affect the manufacturing accuracy.
3: The average wall thickness of the reinforcing bars is 1.0mm. The larger the demoulding Angle is, the easier it is to demoulding the parts, but it is easy to cause the top bars of the parts to be too thin and cause the product to lack glue.
4: In the mould design of the product parting surface, try to ensure the appearance quality of the product. The parting surface is set on the invisible side, so as not to affect the processing error or the flash edge of the mould production after long-term production.